| Customization: | Available |
|---|---|
| Type: | Pressure Transmitter |
| Structure Type: | Mono-Crystalline Silicon Sensor |
|
Still deciding? Get samples of US$ 899/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
AT5020 monocrystalline silicon pressure transmitter is a high-performance pressure transmitter with internationally leading monocrystalline silicon sensor technology and patented packaging process. The monocrystalline silicon sensor is located at the top of the metal body, away from the contact surface of the medium, to achieve mechanical isolation and thermal isolation. The sintered glass integrated sensor leads achieve high-strength electrical insulation with a metal matrix, improving the electronic circuit's flexible performance and ability to withstand transient voltage protection. These monocrystalline silicon sensor packaging technologies ensure that AT5020 monocrystalline silicon pressure transmitter can handle complex chemical and mechanical loads, while providing strong electromagnetic interference resistance for demanding industrial environment applications.
| Mode Type | Code | Description |
| AT5020 | Pressure transmitter ( ±0.05% FS accuracy) | |
| Type | TG | Monocrystalline silicon sensor (gauge pressure, -100kPa to 40MPa, minimum range 0 to 1kPa) |
| TA | Monocrystalline silicon sensor (absolute pressure, 0 to 10MPa,minimum range 0 to 20kPa) | |
| Range | 2 | 0 to 6kPa with the minimum range of 0 to 1kPa (the minimum range 0 to 200pa, ±0.1% FS accuracy below 1kPa) |
| 3 | 0 to 40kPa (0 to 40kPa with the minimum range of 0 to 20kPa absolute pressure) | |
| 4 | 0 to 250kPa | |
| 5 | 0 to 1MPa | |
| 6 | 0 to 3MPa | |
| 7 | 0 to 10MPa | |
| 8 | 0 to 40MPa | |
| Isolation diaphragms | SS | SS316L, silicon oil, -40 to 315ºC |
| HS | Hastelloy C, silicon oil, -40 to 315ºC | |
| GS | SS316L, gold plated, silicone oil, -40 to 315ºC | |
| X | More optional materials | |
| Sealing method | F | FPM O-ring, temperature range -20ºC to 200ºC |
| W | Stainless steel welded seals | |
| N | NBR O-ring, temperature range -40ºC to 120ºC | |
| Electrical connection & housing | -E1 | Aluminum housing, polyurethane coating, 1/2 NPT F, cable entry |
| -E2 | Aluminum housing, polyurethane coating, M20 × 1.5 F, cable entry | |
| -E3 | SS316 housing, 1/2 NPT F, cable entry | |
| -E4 | SS316 housing, M20 × 1.5 F, cable entry | |
| Output signal | S7 | 24 V DC loop power supply, 4 to 20 mA, HART 7, two-wire |
| R | Modbus RTU, four-wire, 24 V DC loop power supply | |
| Display mode | M0 | Without display |
| M5 | LCD with backlight display module, physical buttons and magnetic bar | |
| Process connection | -S6 | SS316 stainless steel (excluding flange material) |
| Process connectors | M1 | M20×1.5 M with Φ3 impulse hole, GB/T193-2003 |
| G1 | G1/2 M with Φ3 impulse hole, EN837 | |
| R1 | 1/2-14NPT M with Φ3 impulse hole, ANSI/ASME B1.20.1 | |
| H10 | HG/T 20592-2009 DN25 RF, PN10 to PN40 (straight thread and flange) SS304 | |
| H20 | HG/T 20592-2009 DN50 RF, PN10 to PN40 (straight thread and flange) SS304 | |
| H30 | HG/T 20592-2009 DN80 RF, PN10 (straight thread and flange) SS304 | |
| H31 | HG/T 20592-2009 DN80 RF, PN16 to PN40 (straight thread and flange) SS304 | |
| X | Optional flange | |
| Mounting bracket | -B04 | U and L bracket, 2" tube |
| NA | Unavailable | |
| Process connection accessory | Z1 | M20 × 1.5 F with impulse pipe Φ14 × 2 × 30mm, SS304 |
| RG | Syphon, M20 × 1.5 F to M20 × 1.5 M, SS304, applicable medium temperature -40 to 150 ºC | |
| RP | Heat sink, M20 × 1.5 F to M20 × 1.5 M, SS304, applicable medium temperature -40 to 150°C | |
| LP | Extra-long heat sink, two RP radiators stacked and connected in series, applicable medium temperature -40 to 300 ºC | |
| NA | Unavailable | |
| Anti-explosion | d | ExdbIICT6 Gb, NEPSI |
| i | ExiaIICT4 Ga, NEPSI | |
| NA | Unavailable | |
| Special treatment | T | Degreasing (removing oil and grease from product surface) |
| NA | Unavailable | |
| Extended warranty | 2W | 2-year warranty |
| 3W | 3-year warranty | |
| Value manifold | 2M | Two-way manifold |
| Subsidiary requirements | E | English stainless steel nameplate |
| R | Russian stainless steel nameplate | |
| E5 | Anti-explosion cable gland, SS316, 1/2 NPT, cable diameter 6 to 8 mm, optional 10 to 14 mm | |
| E6 | Anti-explosion cable gland, SS316, M20 × 1.5, cable diameter 6 to 8 mm, optional 10 to 14 mm | |
| E7 | Nickel plated brass cable gland, 1/2 NPT, cable diameter 6 to 8 mm, optional 10 to 14 mm | |
| E8 | Nickel plated brass cable gland, M20 × 1.5, cable diameter 6 to 8 mm, optional 10 to 14 mm | |
| Report | R | Calibration certificate |
| Special certifications | SIL | SIL |
| Ad | ATEX Exd | |
| Ai | ATEX Exia | |
| CE | Certificate of Compliance | |
| Id | IEC Exd | |
| Ii | IEC Exia | |
| N | NACE | |
| P | PMI certificate | |
| E | EN10204 | |
| Alarm output | HH | NAMUR NE43 analog output, high alarm, 20.5 mA |
| LL | NAMUR NE43 analog output, low alarm, 3.8 mA | |
| NA | Unavailable |
| Category | Product Size | International Commercial Terms (Incoterms) | Terms of Payment | Nearest Port |
| AT5020 Pressure Transmitter | 18 cm*18 cm*25 cm | CIF, CFR, DAP | LC, T/T, D/P | Shanghai, Guangzhou, Tianjin |
AT5010 Single Flange Level TransmitterAT5010 Dual Flange Level TransmitterAT5020 Single Flange Pressure TransmitterCompany Profile
){kind=link}