| Customization: | Available |
|---|---|
| Type: | Differential Pressure Transmitter |
| Structure Type: | Mono-Crystalline Silicon |
|
Still deciding? Get samples of US$ 899/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
With internationally leading monocrystalline silicon sensor technology and patented packaging process, AT5010 differential pressure remote transmitter is a high-performance pressure transmitter. The monocrystalline silicon sensor is located at the top of the metal body, away from the contact surface of the medium, to achieve mechanical isolation and thermal isolation. The sintered glass integrated sensor leads achieve high-strength electrical insulation with a metal matrix, improving the electronic circuit's flexible performance and ability to withstand transient voltage protection. The monocrystalline silicon sensor packaging technologies ensure that AT5010 differential pressure remote transmitter can handle complex chemical and mechanical loads while providing strong electromagnetic interference resistance for demanding industrial environment applications.
| Parameter Class | Specification Code | Clarification |
| AT5010 | DN80 dual flange liquid level transmitter (accuracy ±0.2% FS) | |
| Sensor type | YDP | Monocrystalline silicon sensor (gauge pressure -100 kPa to 1 MPa, minimum range 0 to 10 kPa) |
Measurement range |
3 | 0 to 40 kPa |
| 4 | 0 to 250 kPa | |
| 5 | 0 to 1 MPa | |
| Sealing method | W | Stainless steel welded seals |
Electrical connection |
-E1 | Aluminum housing, polyurethane coating, female thread 1/2 NPT cable entry |
| -E2 | Aluminum housing, polyurethane coating, female thread M20 x T5 cable entry | |
| -E3 | SUS316 stainless steel housing, female thread 1/2 NPT cable entry | |
| -E4 | SUS316 stainless steel housing, female thread M20 x 1.5 cable entry | |
| Output signal | S7 | 24 V DC loop power supply, 4 to 20 mA, HART 7, two-wire |
| R | Modbus RTU, four-wire, 24 V DC loop power supply | |
| Display mode | M0 | Without display |
| M5 | LCD with backlight display module, physical buttons and magnetic bar | |
| Connection location |
/HL | Connection of high and low pressure end (same parameters for high and low pressure end/L option not selected) |
| /H | High voltage terminal connection (optional if the parameters of the high and low voltage terminals do not coincide) | |
| Connection type | C | Capillary tapping |
| Capillary type | P | PVC sheath and armored SUS304 stainless steel |
| H-end capillary length | 00 | Capillary-free |
| 01 | 1 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 02 | 2 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 03 | 3 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 04 | 4 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 05 | 5 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 06 | 6 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 07 | 7 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 08 | 8 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 09 | 9 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 10 | 10 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| Isolated fluid | S | Normal temperature silicone oil, temperature range -40 to 205°C |
| H | High temperature silicone oil, temperature range 0 to 315°C | |
| Process flange | S4 | SUS304 stainless steel |
| S6 | SUS316 stainless steel | |
| Isolation diaphragm | A | SUS316L stainless steelmm |
| C | Tantalum (SS316 for process connections) | |
| P | SUS316 and PTFE coating (range > 50 kPa) | |
| H | Hastelloy C-276 (SS316 for process connections) | |
| G | 316L gold plated | |
| Process connection | H30 | HG/T 20592-2009 DN80 RF, PN10 |
| H31 | HG/T 20592-2009 DN80 RF, PN16 | |
| H32 | HG/T 20592-2009 DN80 RF, PN40 | |
| H33 | HG/T 20592-2009 DN80 RF, PN64 | |
| X | Other connection specifications,please consult the factory | |
| Insert tube | D0 | No Insert tube |
| D805 | OD 66 mm, length 50 mm (for DN80 flange) | |
| D810 | OD 66 mm, length 100 mm (for DN80 flange) | |
| D815 | OD 66 mm, length 150 mm (for DN80 flange) | |
| Connection location | /L | Low pressure end connection (if the parameters of the high and low pressure end are the same, /L option not selected, default provided) |
| Connection type | C | Capillary tapping |
| Capillary type | P | PVC sheath and armored SUS304 stainless steel |
| L-end capillary | 0 | Capillary-free |
| 1 | 1 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 2 | 2 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 3 | 3 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 4 | 4 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 5 | 5 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 6 | 6 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 7 | 7 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 8 | 8 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 9 | 9 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 10 | 10 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| Isolation fluid | S | Normal temperature silicone oil, temperature range -40 to 205°C |
| H | High temperature silicone oil, temperature range 0 to 315°C | |
| Process flange | S4 | SUS304 stainless steel |
| S6 | SUS316 stainless steel | |
| Isolation diaphragm | A | SUS316L stainless steel |
| C | Tantalum (316 for process connections) | |
| P | SUS316 and PTFE coating (range > 50 kPa) | |
| H | Hastelloy C-276 (316 for process connections) | |
| G | 316L gold plated | |
| Process connection | H30 | HG/T 20592-2009 DN80 RF, PN10 |
| H31 | HG/T 20592-2009 DN80 RF, PN16 | |
| H32 | HG/T 20592-2009 DN80 RF, PN40 | |
| H33 | HG/T 20592-2009 DN80 RF, PN64 | |
| X | Other connection specifications, please consult the factory | |
| Insert tube | D0 | No insert tube |
| D805 | OD 66 mm, length 50 mm (for DN80 flange) | |
| D810 | IOD 66 mm, length 100 mm (for DN80 flange) | |
| D815 | OD 66 mm, length 150 mm (for DN80 flange) | |
| Mounting bracket |
-B01 | Bend bracket mounted in 2" fixed pipe with install components and fasteners, carbon steel |
| -B02 | Bend bracket mounted in backboard with Install components and fasteners,, carbon steel | |
| -B03 | Flat bracket mounted in 2" fixed pipe with install components and fasteners, carbon steel | |
| -B14 | Bend bracket mounted in 2" fixed pipe with install components and fasteners, SUS304 stainless steel | |
| -B34 | Flat bracket mounted in 2" fixed pipe with install components and fasteners, SUS304 stainless steel | |
| Anti-explosion | d | ExdllCT6, NEPSI |
| i | ExiallCT4, NEPSI | |
| NA | Unavailable | |
| Special treatment |
T | Degreasing (removing oil and grease from product surface) |
| NA | Unavailable | |
| Extended warranty |
2W | 2-year warranty |
| 3W | 3-year warranty | |
| Flushing ring | R80 | DN80, 316 stainless steel, clamping type |
| Subsidiary requirements | EN | English stainless steel nameplate and stainless steel anti-explosion cable gland |
| Special certifications |
SIL | SIL |
| Ad | ATEX Exd | |
| Ai | ATEX Exla | |
| CE | Certificate of Compliance | |
| Id | IEC Exd | |
| li | IEC Exia | |
| Alarm output | HH | NAMUR NE43 analog output, high alarm, 20.8 mA |
| LL | NAMUR NE43 analog output, low alarm, 3.8 mA | |
| NA | Unavailable |
| Category | Product Size | International Commercial Terms (Incoterms) | Terms of Payment | Nearest Port |
| AT5010 DN80 Dual Falnge Level Transmitter | 18 cm*18 cm*25 cm | CIF, CFR, DAP | LC, T/T, D/P | Shanghai, Guangzhou, Tianjin |
AT5010 Single Flange Level TransmitterAT5020 Pressure TransmitterAT5020 Single Flange Pressure TransmitterAT4500S Sanitary Pressure TransmitterCompany Profile
){kind=link}